Plastic Bottle Filler

Fermtech Plastic Bottle Wand - 3/8"

5 Review(s) Write a Review

Status: In Stock

Available: 177

Feature 5 21313

Quantity

Description
Customer Reviews

This economical plastic bottle filler is an excellent choice for attaching to spigots of bottling buckets or attaching to tube on opposite end of racking tubing. It has a 3/8" OD and a 1/4" ID and uses gravity to shut off the flow of liquid. Simply push the filler down on the bottom of the bottle until the beer reaches the top. After removing the filler the perfect amount of head space is created.

Specifications:

Made out of High Grade Acrylic for Excellent Clarity
13 1/4" Length
3/8" Outer Diameter
1/4" Inner Diameter

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

4.2

Plastic Bottle Wand Filler

I have used this same piece of equipment absolutely countless times for years, WITHOUT fail. It's simple if you are precise and attentive.

Did you find this helpful?

Reviewed by:
Al
from ON Canada on 6/2/2016

Works For Me...

I have no problem with leaks. Attached it to my siphon tubing but found it difficult to get the (siphon) tube filled. Once I did worked well, fast quick and simple!

Did you find this helpful?

Reviewed by:
N/A
from Summerland, BC Canada on 9/29/2014

Required For Bottling

Works very well for bottling.

Did you find this helpful?

Reviewed by:
Eric
from Waterloo, ON Canada on 9/29/2013

Wishing It Was Spring Loaded

I love the idea of this for bottling but with it being gravity triggered I find that it is too sporadic with it's operation. Sometimes it just keeps letting the beer pour out even after removing it from the bottle. I think if it was spring loaded it would be much better. After the second time I poured beer all over the kitchen floor with it, it went in the garbage.

Did you find this helpful?

Reviewed by:
Matt Bryenton
from Charlottetown, PE Canada on 8/31/2013

A Must For Bottling

Bottle fillers are a must if you're not kegging and want to bottle condition your beer. I attach my bottle filler to a spigot on my bottling bucket. To attach them, I use an inch of vinyl tubing. It works like a charm. If you go this route, I highly recommend attaching a dip tube on the inside of the bucket as well. You'll get almost every last drop.

Did you find this helpful?

Reviewed by:
Justin
from Ottawa, ON Canada on 8/23/2013

Fermtech Plastic Bottle Wand - 3/8"

Rating Snapshot

Average Customer Ratings

Mailing List