Inline Chugger Pump Kit (Quick Disconnects)

This kit makes it simple, and includes all the parts necessary, to pump liquids from one vessel to another. Connecting this system to your home brewery will allow for gravity draining and transferring to wherever you need it to go. Quick Disconnects connections makes it quick easy to connect and disconnect hoses as needed.

Stainless Steel Inline Chugger Pump: A pump that moves liquid around with ease, whether it be hot wort from mash tun to brew kettle or re-circulating through a plate chiller and back through a whirlpool arm. All materials are FDA food compliant and the components are UL recognized. The inline version features 180° opposite inlets and outlets. Can handle liquids of up to 250°F. Inlet and outlet connections are 1/2" Male NPT.

Vessel Connection Options: Two Quick Disconnect vessel connections are included with the kit. A configuration can be selected in the options above as they are dependent on your own system and whether the threading on your vessels are male, female, or one of each. The most common will be 2 Stainless Steel Male Quick Disconnect x 1/2" Male NPT as pumps are typically connected between female ball valves. Or often times Stainless Steel Male Quick Disconnect x 1/2" Female NPT are fitted to plate chiller input/output. But your system may be different. Map it out with your own parts before selecting.



Note: Chugger pumps are not self-priming. First, the pump head must be flooded with liquid prior to turning on the pump. If the pump begins making loud noises or squeals, shut it down and make sure the head is full of liquid. To regulate the flow rate of the pump, it must always be on the output side of the pump (as shown in pictures). Use PTFE tape on all threaded connections.

Additional Pictures:

---

Parts Included:

• X-Dry Chugger Pump with Inline Stainless Steel Head x 1
• Stainless Steel Female Quick Disconnect - 1/2" Hose Barb x 4
• Silicone Hose - 1/2" ID x 10' (2 x 5')
• Stainless Steel Male Quick Disconnect x 1/2" Female NPT x 1
• 3 Piece Ball Valve x 1
• Stainless Steel Male Quick Disconnect - 1/2" Male NPT x 1
• Vessel Connection 1 (Out): Stainless Steel Male Quick Disconnect (Male or Female) x 1
• Vessel Connection 2 (In): Stainless Steel Male Quick Disconnect (Male or Female) x 1

All Female Quick Disconnects include Silicone Gaskets