1. Home
  2. Draft Equipment
  3. Series X.1 Kegerator - Black Phantom Single Tower
Series X.1 Kegerator - Single Tower | Black Phantom
Series X.1 Kegerator - Single Tower | Black Phantom

Series X.1 Kegerator - Black Phantom Single Tower

Write a Review
Your Price: $904.99
Status: In Stock

NEW Series X.1 Model - More Power Efficient, Faster Cooling, and Better Insulation!

Introducing the Series X.1 Kegerator. It is new and improved, sporting many new design and feature changes to allow for a better Kegerator that can dispense from a single keg. These improvements make it perfect for home or commercial use.

It comes equipped with a Black Phantom single faucet beer tower, Nukatap Stainless Steel Stealth Bomber Beer Faucet, duotight fittings, Polyethylene tubing, a MK4 Regulator (CO2), and the hardware you will need to hook up your tower. This kit includes everything you will need to take advantage of duotight hardware.

Please Note: This kit does not contain ball lock disconnects, pin lock disconnects, or sanke keg couplers, they will need to be purchased separately. You will also need Duotight (Push-In) Fittings - 1/4" FFL X 5/16" (8mm) to attach to ball/pin lock disconnects or Duotight (Push-In) Fittings - 7/8"-14 (5/8" Female BSP) X 5/16" (8mm) to attach to sanke keg couplers.

The single faucet tower is made out of 304 stainless steel and is finished in a beautiful matte black. This tower's classy matte black finish perfectly matches the included Nukatap Stainless Steel Stealth Bomber Beer Faucet and makes a great addition to minimalist kegerator setups.

The 3" (column) tower is air cooled (wider towers are kept cooler) and comes with two different sizes of Polyethylene Tubing. The 5' of 5/32" ID (4mm) X 5/16" OD (8mm) Polyethylene is used as the beer tubing and attaches to the tower shank. Meanwhile the included 13/64" ID (5mm) X 5/16" OD (8mm) Polyethylene is used as the gas tubing in case you want to hook up your gas.

The faucet is our newest, high quality, Nukatap Stainless Steel Stealth Bomber Beer Faucet. The tap handle included is basic black but may not be exactly as shown.

Duotight fittings are designed to work by simply pushing in the compatible tubing.

Inside each fitting are dual EPDM o-rings that provide superior sealing capacity due to having twice the sealing surface area when compared to other push in fittings. This makes Duotight fittings even more reliable and significantly reduces the chance of a leak.

For optimal performance it is recommended that when cutting your tubing it is cut straight, not on an angle, this helps to ensure a complete seal.

Dispense beverages with this beautiful commercial quality Kegerator.

Key Improvements (From Series X Kegerator):
  • 10% More Energy Efficient
  • 15% Faster Cooling and Improved Chilling in Warmer Climates
  • 40% Thicker Walls for Improved Insulation
  • Interior Fridge Light for Better Visibility

Key Improvements (From Series 4 Kegerator):
  • 30% Larger Evaporator
  • 25% Larger Condenser

Kegerator Fridge Features:
  • Tower Fan (Font Fan)
  • Circuit Boards with temperature control, calibration, and on-board memory functions
  • Sturdy guard rail system
  • Drip tray & rear cylinder bracket holder
  • Glass holder and wire shelf

Please Note:
  • Some assembly is required.
  • Ball/Pin Lock Disconnects and Sanke Keg Couplers are not included.
  • You will need to use Duotight (Push-In) Fittings in order to hook up your Polyethylene lines to Ball Lock/Pin Lock Disconnects or Sanke Keg Couplers.

  • MK4 Regulator (CO2)
  • Duotight Food Grade Plastic (Push-In) Fitting - 1/4" FFL X 5/16" (8mm)
  • Font Fan (toggle on/off)
  • CO2 Cylinder Bracket Holder
  • Guard Rail
  • Drip Tray
  • Reinforced Four Point Anchored Castor Wheels
  • Stainless Steel Door
  • Black Reinforced Plastic Top
  • Nukatap Stainless Steel Stealth Bomber Beer Faucet x 1
  • Black Phantom Stainless Steel Single Faucet Beer Tower x 1
  • Stainless Steel Push-In Tower Shank Assembly - 1/4" (6.5mm) x 1
  • Polyethylene Tubing - 5/32" ID (4mm) X 5/16" OD (8mm) x 5'
  • Polyethylene Tubing - 13/64" ID (5mm) X 5/16" OD (8mm) x 8'
  • Duotight Food Grade Plastic (Push-In) Straight Reducer - 1/4" (6.35mm) X 5/16" (8mm) x 1
  • Black Plastic Tap Handle x 1
  • 5-in-1 Tap and Cylinder Tool x 1
  • Mounting Hardware
  • 110V

Exterior Dimensions:
  • Depth (with Co2 Holder): 31 1/4"
  • Depth (no Co2 Holder): 25"
  • Width: 23 5/8"
  • Height (no Wheels, Tower, or Rails): 33 1/2"
  • Height (with Tower): 49 3/8"

Interior Dimensions:
  • Height: 28 5/8"
  • Width: 19 3/8
  • Depth: 17 1/2"

Tower Measurements:
  • Faucet Height - 9 3/8"
  • Column Height - 12 1/2"
  • Column Diameter - 3"

Shipping Dimensions:
  • Height: 36"
  • Width: 29"
  • Depth: 26"

0 Items