1. Home
  2. Brewing Equipment
  3. Ss Brewtech Brew Bucket Chilling Coil Kit - 7 Gallon
The Ss Brewtech 7 Gallon Brew Bucket Fermenter Chilling Coil Kit
The Ss Brewtech 7 Gallon Brew Bucket Fermenter Chilling Coil Kit

Ss Brewtech Brew Bucket Chilling Coil Kit - 7 Gallon

Write a Review
Your Price: $269.99
Status: In Stock
THIS KIT IS FOR OWNERS OF SS BREWTECH 7 GALLON BREW BUCKET FERMENTER

This Ss Brewtech Chilling Coil Kit uses 304 stainless steel components and comes with a neoprene jacket designed to fit perfectly on the 7 gallon brew bucket fermenter. It is meant to be paired with the FTSs Touch Temperature Control allowing you to chill your beer in the summer and warm your beer in the winter!! Use a chill water source when it's hot or warmed water if it's cold! And move hot wort from your brew kettle and go for one stop chilling in your fermenter! As soon as your wort is ready for transfer from your brew kettle, just move it over to one of our Ss fermenters and then take advantage of the FTSs chiller coil we have in your beer to bring down to pitching temps!

Temperature control during fermentation is one of the most significant contributors to the flavour of our beers, yet it all too often gets overlooked. For centuries brewers have limited the styles of beers they produced to the varying temperatures of the seasons. That didn't work for us, so we poured a few pints and took a fresh look at this age-old problem. The Fermentation Temperature Stabilization System (FTSs) is the result of applying the science of thermodynamics with what we've learned from our experience in the craft brewing industry. The system is elegant and engineered, yet it stays true to the heart and soul of us home brewers.

Compatible With:




Includes:
  • Ss Brewtech Brew Bucket Lid - 7 Gallon | 6" TC x 1
  • Ss Brewtech Immersion Chiller Coil (with 3/8" OD barbs) - 6" TC x 1
  • Ss Brewtech Neoprene Brew Bucket FTSs Jacket - 7 Gallon x 1
  • Ss Brewtech Stainless Steel Tri-Clover Cap With 1/2" Blow-Off PRV - 3" TC x 1
  • Ss Brewtech Stainless Steel Weldless Thermowell - 11 3/4" x 1
  • Ss Brewtech Stainless Steel Compression Fitting Plug - 17mm x 1
  • Ss Brewtech Stainless Steel Tri-Clover Clamp - 6" TC x 1
  • Ss Brewtech Stainless Steel Tri-Clover Clamp - 3" TC x 1
  • Ss Brewtech Silicone Tri-Clover Gasket - 6" TC x 1
  • Ss Brewtech Silicone Tri-Clover Gasket - 3" TC x 1
  • Hose Clamps x 4

Specifications:
  • Made out of 304 Stainless Steel
  • 5mm Thick Jacket
  • Integrated PRV
  • Valve releases at 2 - 2.5 PSI
  • 1/2" Hose Barb (Blow-Off Cap)
  • 3/8" OD Barbs (Coil Inlet/Outlet)
TOP
0 Items