Stainless Steel Welded Brew Kettle - 19 Gallon (72L)

Our extremely popular Stainless Steel 20 Gauge Brew Pot is a great entry level brew pot that comes with a Stainless Steel 2 Piece Ball Valve & 2" Probe Thermometer included. Capacity of 19 gallons (71.9 liters). Two port kettle with 1/2" female couplings aligned vertically. This is an entry level pot. It is not Blichmann quality and may have cosmetic defects.

Boiling the wort is an important process in brewing. This process takes place before yeast is added to encourage fermentation of sugar. It is done to release the flavour of the hops, sanitize the wort and encourage the necessary chemical reactions. The wort is often brewed in large vats but homebrewers can always use stainless steel brew pots/kettles.

Neophyte brewers can benefit from a stainless steel brew pot, they are convenient because they are easy to clean. During the process of boiling the wort, there is a tendency that the liquid will caramelize at the bottom. Using a stainless steel brew pot prevents this particular problem from happening.

This particular brew pot is made from 200 Series 20-gauge stainless steel which has adequate resistance against corrosion. It is a great material for entry-level brewing pots. The pot has the capacity to hold 19 gallon of wort for adequate brewing. This is a good size for home brewers who are still starting out. This stainless steel brew pot also comes with a stainless steel ball valve and probe thermometer which can be fastened to the pot using the two female couplings. The pot's surface is polished to give it a sophisticated look.

Since the pot is made from stainless steel, it is safe to use oxygenated cleaners to clean it without worrying of any unnecessary chemical reactions that will damage the pot's surface.

---

---

We recommend you purchase this product by itself. Shipping items inside the pot increases chances of damage during shipping. We will of course ship items inside a pot if you want. But we can not assume liability for damage if you choose to do so.

---

Specifications:

• 200 Series 20-Gauge Stainless Steel
• Polished Stainless Steel
• 19 Gallon Capacity
• Included lid
• 1/2" NPT Welded Fittings

Includes:

• Mash King Thermometer with 3" Dial and 2" Stem
• Stainless Steel 2-Piece Ball Valve
• FREE Every Drop Dip Tube accessory, a $15 value added free to every welded kettle!

Interior Kettle Dimensions:

• 17 1/2" Height (44.5cm)
• 17 1/2" Diameter (44.5cm)
• 1 1/2" (3.8cm) From Center of Bottom Port to Bottom
• 6 1/2" (16.5cm) From Center of Thermometer Port to Bottom

Exterior Kettle Dimensions (Handles Included):

• 18 1/2" Height (47cm)
• 21" Diameter (53.3cm)

Please note that this product does NOT have a tri-clad bottom

---

FULL KETTLE COMPARISON CHART